Description
The TPS51117 device is a cost-effective, synchronous buck controller for POL voltage regulation in notebook PC applications. The controller is dedicated for the operation of the Adaptive On-Time D-CAP mode. This mode provides ease of use, low external component count, and fast transient response. Auto-skip mode for high efficiency down to the milliampere load range, or PWM-only mode for low-noise operation is selectable.
The current-sensing scheme for positive overcurrent and negative overcurrent protection is loss-less low-side RDS(on) sensing plus temperature compensation. The device receives a 5-V (4.5 V to 5.5 V) supply from another regulator such as the TPS51120 or TPS51020. The conversion input can be either VBAT or a 5-V rail, ranging from 1.8 V to 28 V, and the output voltage range is from 0.75 V to 5.5 V.
The TPS51117 is available in a 14-pin VQFN or a 14-pin TSSOP package and is specified from –40°C to 85°C.
Features
-
- High Efficiency, Low Power Consumption, 4.5-µA
-
- Typical Shutdown Current
-
- Fixed Frequency Emulated On-Time Control,
-
- Adjustable from 100 kHz to 550 kHz
-
- D-CAP™ Mode With 100-ns Load Step Response
-
- < 1% Initial Reference Accuracy
-
- Output Voltage Range: 0.75 V to 5.5 V
-
- Wide Input Voltage Range: 1.8 V to 28 V
-
- Selectable Auto-Skip/PWM-Only Operation
-
- Temperature Compensated (4500 ppm/°C)
-
- Low-Side RDS(on) Overcurrent Sensing
-
- Negative Overcurrent Limit
-
- Integrated Boost Diode
-
- Integrated OVP/UVP and Thermal Shutdown
-
- Powergood Signal
-
- Internal 1.2-ms Voltage Soft-Start
-
- Integrated Output Discharge (Soft-Stop)
APPLICATIONS
-
- Notebook Computers
-
- I/O Supplies
-
- System Power Supplies
