Description
SST’s 25 series Serial Flash family features a four-wire, SPI-compatible interface that allows for a low pin-count package which occupies less board space and ultimately lowers total system costs. The SST25VF016B devices are enhanced with an improved operating frequency which lowers power consumption. SST25VF016B SPI serial flash memories are manufactured with SST’s proprietary, high-performance CMOS SuperFlash technology. The split-gate cell design and thick-oxide tunneling injector attain better reliability and manufacturability compared with alternate approaches.
Features
– Single Voltage Read and Write Operations
– 2.7-3.6V
– Serial Interface Architecture
– SPI Compatible: Mode 0 and Mode 3
– High-Speed Clock Frequency
– Up to 50 MHz
– Superior Reliability
– Endurance: 100,000 Cycles (typical)
– Greater than 100 years Data Retention
– Low Power Consumption:
– Active Read Current: 10 mA (typical)
– Standby Current: 5 µA (typical)
– Flexible Erase Capability
– Uniform 4 KByte sectors
– Uniform 32 KByte overlay blocks
– Uniform 64 KByte overlay blocks
– Fast Erase and Byte-Program:
– Chip-Erase Time: 35 ms (typical)
– Sector-/Block-Erase Time: 18 ms (typical)
– Byte-Program Time: 7 µs (typical)
– Auto Address Increment (AAI) Programming
– Decrease total chip programming time over
-Byte-Program operations
-End-of-Write Detection
– Software polling the BUSY bit in Status Register
– Busy Status readout on SO pin in AAI Mode
– Hold Pin (HOLD#)
– Suspends a serial sequence to the memory
without deselecting the device
– Write Protection (WP#)
– Enables/Disables the Lock-Down function of the
status register
– Software Write Protection
– Write protection through Block-Protection bits in
status register
– Temperature Range
– Commercial: 0°C to +70°C
– Industrial: -40°C to +85°C
– Packages Available
– 8-lead SOIC (200 mils)
– 8-contact WSON (6mm x 5mm)
– All devices are RoHS compliant
